MW400S Martek Power Abbott

Active Power Factor Correction & Isolated DC Output Module

Meets Harmonic Requirements of MIL-STD-1399

Meets CE101 & CE102 of MIL-STD-461 (No External Filter Required)

Meets MIL-STD 704E & MIL-STD-810

Non-Latching Output Over-Voltage Protection

Isolated Input AC Good TTL Signal & Isolated Output DC Good Signal

Isolated 13 Vdc Standby Output

Fully Rated 400W of Output Power from 90 VAC to 265 VAC and Up To 100°C Base Plate Temperature

Environmental Screening Available

Selection Guide / Data Sheet
Specifications subject to change without notification.
Environmental Screening
	M-Grade Environmental Screening
	Stabilization Bake	105°C for 24 hours Similar to MIL-STD 883, M1008.2, Condition B
	Temperature Cycling	10 Cycles -55°C to +105°C, (Transition Period 5°C/min.), Similar to MIL-STD-883, M1010, Condition B
	Burn-In	150 Hours @ +85°C min
	Final Test	Full ATP
	MTBF @ 50°C, GB	144,380 Hours

	I-Grade Environmental Screening
	Burn-In	16 Hours @ +50°C min
	Final Test	Full ATP
	MTBF @ 50°C, GB	71,330 Hours

Nominal Output Voltage (Volts)	Output Current (Amps)	Model Number (Unscreened)	Model Number (Unscreened w/M3 Inserts)	Model Number (Screened)	Model Number (Screened w/M3 Inserts)
2	100	MW400SI/2	MW400SI/2-I	MW400SM/2	MW400SM/2-I
3.3	100	MW400SI/3.3	MW400SI/3.3-I	MW400SM/3.3	MW400SM/3.3-I
5	80	MW400SI/5	MW400SI/5-I	MW400SM/5	MW400SM/5-I
12	33.3	MW400SI/12	MW400SI/12-I	MW400SM/12	MW400SM/12-I
15	26.7	MW400SI/15	MW400SI/15-I	MW400SM/15	MW400SM/15-I
24	16.7	MW400SI/24	MW400SI/24-I	MW400SM/24	MW400SM-24-I
28	14.3	MW400SI/28	MW400SI-28-1	MW400SM/28	MW400SM/28-I

B. J. Wolfe Enterprises, Inc